DRYLOK Masonry Products

If water is leaking through existing masonry or you need to protect new construction, our proprietary formula is GUARANTEED to stop water. 

A versatile masonry waterproofer that can be applied interior, exterior, above or below grade. Guaranteed to stop water up to 10 psi and resists 98 mph hurricane winds. 

If water is leaking through existing masonry or you need to protect new construction, DRYLOK Extreme Masonry Waterproofer’s proprietary formula is GUARANTEED to stop water.

 A versatile masonry waterproofer that can be applied interior, exterior, above or below grade. Guaranteed to stop water up to 15 psi and resists cat 4 (140+ mph) hurricane winds. Resists mildew on the dry paint film. 

 Non-pigmented masonry waterproofer specially formulated to use on bare masonry floor and wall surfaces. Provides a durable, waterproof easy to clean, non-yellowing high gloss finish. 

 A versatile masonry waterproofer that can be applied interior, exterior, vertical, horizontal, above or below grade. Guaranteed to stop water up to 4 psi and resists 98 mph hurricane winds. 

 DRYLOK® Powdered Masonry Waterproofer — when mixed with water — actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier GUARANTEED to stop water. 

 A versatile masonry waterproofer that fills and permanently seals porous masonry against water migration, forming a bond that becomes an actual part of the original surface. 

 A specially formulated Curing Membrane & Penetrating Sealer soaks right in and provides matte protection that looks beautiful and natural. Use on interior and exterior masonry surfaces, including concrete driveways, basement floors, garage floors, concrete sidewalks, patios, terrazzo, brick, and slate. 

Porous materials like natural and man-made stone, concrete, stucco and masonry will start to break down, dust, pit, crack, and/​or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer.   

  The clean lines and smooth face of modern brick and sandstone are simply complimented with a high gloss shiny smooth finish. This product has the highest solids of all the clears and will offer the most protection. A non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high gloss, wet look finish is desired. 

Porous materials like natural and man-made stone, concrete, stucco and masonry will start to break down, dust, pit, crack, and/​or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. 

 This Clear Low Sheen Penetrating Sealer provides clear, weatherproof protection against deterioration caused by de-icing salts, household cleaners, acid, gasoline, oil, and weathering. Formulated with our exclusive SALTLOK® Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces. 

 Porous materials like natural and man-made stone, concrete, stucco and masonry will start to break down, dust, pit, crack, and/​or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. 

 Protect and enhance the appearance of concrete floors with this dirt resistance showroom-quality interior/​exterior finish.  

 A semi-gloss high-performance coating for commercial and residential use, DRYLOK® E1 Latex 1‑Part Epoxy Concrete Floor Paint utilizes an Advanced Epoxy Ester Resin fortified formulation to deliver greater protection and durability. Use it to create a gorgeous, showroom-quality finish that’ll be easy to keep clean even in high-traffic areas. 

 All-in-one paint and primer solution specifically formulated to beautify and protect concrete surfaces. 

DRYLOK® Latex Concrete Floor Paint is an all-in-one paint and primer that is scientifically formulated to protect and decorate interior and exterior masonry floors.

The attractive, flat, non-slip formula is effective on both new and previously painted surfaces.

 An invisible water repellent which creates a long lasting barrier against moisture as it penetrates the substrate without creating a film or changing the look or texture of the on the surface. 

 A clear, durable, water-repellent, specialty formulation for use on exterior, above-grade, vertical and horizontal brick and masonry surfaces. With just one coat, it minimizes the deterioration of masonry and mortar, and helps control efflorescence (salt deposits) and surface staining. 

 A unique texture additive for all types of interior and exterior floor surfaces. Mixes easily with clear finishes, paints, and stains to create a slip-resistant coating. 

The incorporation of DRYLOK® Non-Skid Texture Additive creates a slip-resistant coating that increases traction and helps prevent falls, accidents and injuries. Use it with DRYLOK® E1 Latex 1‑Part Epoxy Concrete Floor Paint and other oil base, latex base or epoxy floor paints and clear coatings.

The addition of DRYLOK® Non-Skid Texture Additive will not change the drying characteristics of the paint.

 Quick setting hydraulic cement creates a watertight seal in 3 to 5 minutes. Works above and below ground level even with active leaks. 

 A fast-setting hydraulic cement sets in just 3 – 5 minutes, preventing active or reoccurring water from flowing through cracks and holes in concrete and masonry structures. 

 DRYLOK® Masonry Crack Filler is a superior, fast setting, ready-to-use acrylic fortified with silicone caulk. 

 DRYLOK® Masonry Crack Filler seals, waterproofs and repairs cracks and mortar joints in concrete sidewalks, walls, steps, and floors. It dries to color of concrete, will not bleed, and cleans up in a jiffy with just soap and water. Designed to withstand foot and vehicle traffic. 

 DRYLOK® Pourable Masonry Crack Filler is a patching application designed for filling cracks in concrete surfaces. It can help to stop and prevent damage from water penetration. 

DRYLOK® Pourable Masonry Crack Filler is formulated to fill and seal small cracks in concrete surfaces, sidewalks, walkways, steps, patios, garage floors, and more.

It provides excellent adhesion, dries to the color of concrete and cleans up easily with soap and water.

 DRYLOK® Latex Bonding Agent is specifically formulated for permanently bonding new concrete or plaster to old concrete or plaster. Use as an additive to DRYLOK Powdered Concrete & Masonry Wateproofer for improved adhesion, durability and resistance to chemicals & acids.

 DRYLOK® Latex Bonding Agent bonds new concrete, stucco, stone, plaster and more to structurally sound, difficult surfaces like dense, slick or porous concrete, stone, drywall, hardboard, and plaster walls. When used as an additive in concrete mixes for patching, DRYLOK® Latex Bonding Agent improves adhesion and increases the resiliency and elasticity of the patch. DRYLOK® Latex Bonding Agent may also be used for pointing plaster cracks. 

 DRYLOK® Powder Concrete and Masonry Etch & Cleaner prepares interior/​exterior masonry and concrete for waterproofing and painting.  

DRYLOK® Etch is highly effective in etching masonry, stone, tile, and brick. It removes unsightly efflorescence (salt deposits) as well as excess mortar.

Use DRYLOK® Etch, as a safer alternative to muriatic acid and is not activated until mixed with water for safe storage. It is perfect for treating smooth concrete and condition galvanized surfaces prior to painting.

  DRYLOK® Concrete and Masonry Liquid Etch & Clean is a one step concrete cleaner, etcher and brightener. Great for preparing masonry surfaces before coating application.  

 A modern formulation, DRYLOK® Concrete and Masonry Liquid Etch & Cleaner is highly effective in etching masonry, stone, tile, and brick. It removes unsightly efflorescence (salt deposits) as well as excess mortar. Use DRYLOK® Concrete and Masonry Liquid Etch & Cleaner, as a safer alternative to muriatic acid, to treat smooth concrete and condition galvanized surfaces prior to painting. 

 Our DRYLOK® Brush is specially designed to hold heavy-bodied products in the bristles, enabling you to deliberately apply a nice, smooth coating. 

 The DRYLOK® Brush is a 4″ synthetic bristle brush specially designed to hold heavy-bodied products such as DRYLOK® Original Concrete & Masonry Waterproofer, DRYLOK® Extreme Concrete & Masonry Waterproofer, DRYLOK® Latex Concrete Floor Paint and any other heavy duty coatings.